A Guide To Installing Air Conditioners in Phoenix Arizona
When choosing an air conditioner there are two common types available. A standard system which is operated by a condenser getting warm causing the evaporator coil to get cold and then cooling the home. The units using heat pump systems work the same way but during winter months the opposite procedure occurs within the unit and gives it the ability to heat a home.
Prior to any standard air conditioner or heat pump installation care must be taken in choosing where it will be placed. It’s important to choose a spot with no steam or heating sources nearby. No obstacles should be in the way of the unit’s wiring or pipes. It’s important to never put an air conditioning unit near a doorway and make certain the specified distance between the wall, ceilings, walls and any other obstacle is followed.
When it comes to outdoor air conditioner installation it’s imperative the unit not be installed near plants or animals and away from flammable gases and heat sources. An outside air conditioning unit should be placed in the shade and have at least 100 mm of space to the rear of it and 600 mm to the front. Every air conditioning unit’s power supply should be installed by a qualified electrician.
Any type of air conditioner installation may require the knowledge and skills of ac contractors. People who want to install their air conditioning units themselves may be able to get a kit covering the details of installing standard air conditioners as well as performing heat pump installation. The kit will give you the parts and tell you what tools will be needed. Should any problems occur during the standard or heat pump systems air conditioning installation process, ac contractors are always available to help remedy the situation.
There are times when people will experience a decrease in performance of their air conditioning unit or have it stop working all together. When this happens it’s time to check certain things on the air conditioning unit. Check the thermostat to see if it’s set at the desired temperature. Make sure it’s not set to “off” or “heat.” Check the electricity is flowing to all f the unit’s components including key switches and controls. Make certain the heat pump installation was done correctly.